✅ Future-proofBuilt to keep working — even if the maker walks away.
It works locally over Z-Wave, so it keeps running even if Aeotec shuts down the app or the servers. Nothing here ties you to a single company's survival.
Works locally over Z-Wave — keeps running without the maker's cloud
Still in production
Companion app is actively updated
Based on how this device connects (local vs. cloud), whether it’s still sold and supported, and its app / subscription. A guide, not a guarantee.
Connectivity
Z-Wave
Prices
No prices yet — be the first to add one.
Community tags
Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).
Aeotec Smart Dimmer 6 is a low-cost Z-Wave Dimmer plug-in module specifically used to enable Z-Wave command and control (on/off/dim) of any plug-in tool. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. Its surface has a Smart RGB LED, which can be used for indicating the output load status or strength of the wireless signal. You can configure its indication colour according to your favour. The Smart Dimmer 6 is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
Want to buy adds it to your wish list and follows Aeotec for updates. I own it adds it to your collection.
Aeotec Smart Dimmer 6 is a low-cost Z-Wave Dimmer plug-in module specifically used to enable Z-Wave command and control (on/off/dim) of any plug-in tool. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status. Its surface has a Smart RGB LED, which can be used for indicating the output load status or strength of the wireless signal. You can configure its indication colour according to your favour. The Smart Dimmer 6 is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.
Hardware platform
ZM5101
Short description
Smart Dimmer 6 is a plug-in on/off/dim switch module that also provides energy metering.
Product identifier
ZW099-A02
Countries / regions
United States of America
Certification number
ZC10-17035455
Radio range z wave (m)
40
Configuration parameters
Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 91
Supports explorer frames
Yes
Supported command classes
Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
Controlled command classes
Identifier Name Key Version COMMAND_CLASS_BASIC
Supported / controlled meter types
Meter Type Rate Type Description Electric meter
Value 2.5 a z wave scene type value scene firmware updatable value updatable by consumer by rf color value white electric load type value incandescent dimmable led supported meter type value electric energy association groups
Group Number Maximum Nodes Supported End Point ID Description 1
From to description 0 60000 the available range is 0 to 60000 92 minimum change in wattage percent (in terms of percentage) to induce a meter report the value here represents minimum change in wattage percent (in terms of percentage) to induce a meter report. 0 1 0 0 0 from to description 0 100 the available range is 0 to 100% 100 set 101 103 to default. set 101 103 to default value. 0 1 0 0 0 from to description 1 1 set 101 103 to default value. 101 to set which report needs to be sent in report group 1 to set which report needs to be sent in report group 1 0 4 0 0 0 from to description 1 1 send meter report for voltage 2 2 send meter report for current 4 4 send meter report for watt 8 8 send meter report for k wh 102 to set which report needs to be sent in report group 2 to set which report needs to be sent in report group 2 0 4 0 0 0 from to description 1 1 send meter report for voltage 2 2 send meter report for current 4 4 send meter report for watt 8 8 send meter report for k wh 103 to set which report needs to be sent in report group 3 to set which report needs to be sent in report group 3 0 4 0 0 0 from to description 1 1 send meter report for voltage 2 2 send meter report for current 4 4 send meter report for watt 8 8 send meter report for k wh 2 make dimmer blink this parameter is used to set the smart dimmer to start the blinking state. 0 2 0 0 3850 from to description 1 255 specify the cycle of on/off. 256 32512 specify the time of dimmer blinking. 110 set 111 113 to default. set 111 113 to default. 0 1 0 0 0 from to description 1 1 set 111 113 to default. 111 the time interval of sending report group 1 the time interval of sending report group 1 0 4 0 0 3 from to description 1 2147483647 the available range is 1 to 2147483647 seconds 112 the time interval of sending report group 2 the time interval of sending report group 2 0 4 0 0 600 from to description 1 2147483647 the available range is 1 to 2147483647 seconds 113 the time interval of sending report group 3 the time interval of sending report group 3 0 4 0 0 600 from to description 1 2147483647 the available range is 1 to 2147483647 seconds 200 partner id set the partner id 0 1 0 0 0 from to description 0 0 aeon labs standard product 1 255 others 252 enable/disable the configuration parameters to be locked. enable/disable the configuration parameters to be locked. 0 1 0 0 0 from to description 1 1 enable 0 0 disable 254 device tag set the device tag for smart dimmer 6 0 2 0 0 0 from to description 1 32767 the available range is 1 to 32767. 3 current overload protection when this parameter is enabled, the output load will be turned off automatically when the current overrun 2.6 a and the time more than 2 minutes. 0 1 0 0 0 from to description 0 0 disable 1 1 enable 80 to set which notification report can be sent to associated nodes in association group 1 to set which notification report can be sent to associated nodes in association group 1 when the state of smart dimmer’s load is changed 0 1 0 0 0 from to description 3 3 send hail cc when using action button to change the output load state. 0 0 send nothing 1 1 send hail cc 2 2 send basic report cc 81 configure the state of led configure the state of led when it is in energy mode, momentary indicate mode or n ight light mode. 0 1 0 0 0 from to description 0 0 energy mode, the led will follow the status (on/off) of its load 1 1 momentary indicate mode, when the state of dimmer’s load changed, the led will follow the status (on/off) of its load, but the led will turn off after 5 seconds if there is no any switch action. 2 2 night light mode. 83 configure the rgb value when it is in night light mode. configure the rgb value when it is in night light mode. 0 4 0 0 1774619 from to description 65536 16711680 red color value 1 255 blue color value 256 65280 green color value 255 reset the smart dimmer 6 reset the smart dimmer 6 0 4 0 0 0 from to description 0 0 reset all configuration parameters to factory default setting 1431655765 1431655765 reset smart dimmer 6 to factory default setting and exclude from the network 84 configure the brightness level of rgb led (0% 100%) when it is in energy mode/momentary indicate mode. configure the brightness level of rgb led (0% 99%) when it is in energy mode/momentary indicate mode. 0 4 0 0 3289650 from to description 0 99 the brightness level of green color 256 355 the brightness level of yellow color 65536 65635 the brightness level of red color 90 enable or disable the parameter 91 and 92 enable or disable the parameter 91 and 92. 0 1 0 0 0 from to description 0 0 disable 1 1 enable texts
