Long descriptionThe first addressable RGBTW (Multi-Color + Tunable White) Z-Wave LED Strip & Controller kit from Inovelli which has 45+ built in animations, the ability to build your own animations and heads up notifications (ie: garage door is left open, LED strip can flash red). From to description 0 0 returns lightstrip to the previous level prior to being turned off 1 99 percent level to turn the lightstrip to when turned on (1 = 1%, 2 = 2%, etc) 1 number of pixels when individually addressable leds are used, this parameter tells the controller the number of pixels that are attached. 0 automatic recognition of pixels. 1..130 manually set the number of pixels. 2 1 0 130 0 from to description 0 0 automatic recognition of pixels 1 130 manual input of pixels (1 = 1 pixel, 2 = 2 pixels, etc) 2 dimming speed this changes the speed in which the lightstrip dims up or down. a setting of 0 should turn the light immediately on or off (almost like an on/off switch). increasing the value should slow down the transition speed. 0 instant, 1 fast .. 98 slow 2 1 0 98 3 from to description 0 0 instant on 1 98 speed of dimming up or down (1 = fast, 98 = slow) 4 minimum level the minimum level that the strip can be dimmed to. useful when the user has an led strip that does not turn on or flickers at a lower level. 2 1 1 45 1 from to description 1 45 percent value of the minimum dim level (1 = 1%, 2 = 2%, etc) 17 active power reports the power level change that will result in a new power report being sent. the value is a percentage of the previous report. 0 = disabled. 2 1 0 100 10 from to description 0 0 disabled 1 100 set the percentage level change of the previous report (1 = 1%, 2 = 2%, etc) 10 state power restored the state the switch should return to once power is restored after power failure. 0 off. 1 default color / level (parameter 9). 2 previous 2 1 0 2 2 from to description 0 0 off 1 1 returns to the default color / level as set in parameter 9 2 2 returns to the previous setting before loss of power 24 custom effect parameter 3 a custom effect with up to 4 actions can be turned on with correct input for parameters 22 24, 30. this parameter controls the duration of those actions. see website for details. https://inovelli.com/lzw45/parameters 2 4 0 1010580540 0 from to description 0 1010580540 see website for further instructions: https://inovelli.com/lzw45/parameters 31 pixel effect turn on an effect that utilizes the individually addressable leds. byte 0 = effect, byte 1 = level 2 2 0 32767 0 from to description 0 32767 see website for further instructions: https://inovelli.com/lzw45/parameters 51 button delay the 700ms delay that occurs after pressing the physical button to turn the switch on/off is removed. consequently this also removes the following scenes: 2x, 3x, 4x, 5x tap. still working are the 1x tap, held, released, and the level up/down scenes. 2 1 0 1 1 from to description 0 0 yes disable 700ms delay 1 1 no do not disable 700ms delay 3 ramp rate this changes the speed in which the lightstrip turns on or off. for example, when a user sends the switch a basic set(value: 0x ff) or basic set(value: 0x00), this is the speed in which those actions take place. a setting of 0 should turn the light immediately on or off (almost like an on/off switch). increasing the value should slow down the transition speed. a setting of 99 should keep this in sync with parameter 2. 0 instant. 1 fast .. 98 slow. 99 keep in sync with parameter 2 2 1 0 99 99 from to description 0 0 instant on 1 99 speed of turning on/off (1 = fast, 99 = slow) 5 maximum level the maximum level that the strip can be dimmed to. useful when the user has an led strip that reaches its maximum level before the dimmer value of 99. 2 1 55 99 99 from to description 55 99 percent value of the maximum dim level (55 = 55%, 56 = 56%, etc) 6 auto off timer automatically turns the strip off after this many seconds. when the strip is turned on a timer is started that is the duration of this setting. when the timer expires, the strip is turned off. 0 auto off is disabled 2 2 0 32767 0 from to description 0 0 auto off is disabled 1 32767 amount of seconds until the lightstrip turns off automatically (1 = 1 second, 2 = 2 seconds, etc) 8 default level (z wave) default level for the dimmer when it is powered on from a z wave command (i.e. basic set(0x ff). a setting of 0 means that the switch will return to the level that it was on before it was turned off. 0 previous 2 1 0 99 0 from to description 0 0 returns lightstrip to the previous level prior to being turned off 1 99 percent level to turn the lightstrip to when turned on (1 = 1%, 2 = 2%, etc) 9 default color&temp byte(3 2): values between 2700 6500 represent a color temperature. byte(1 0): values between 1 360 represent the color on the hue color wheel. the value of 361 represents a random color and a value of 0 represents the previous color. 2 4 0 6500 0 from to description 0 0 returns the lightstrip to the previous color when turned on 1 360 represents the values of the hue color wheel 2700 6500 represents the values of color temperature (kelvins) where 2700 is warm white and 6500 is cool white 23 custom effect parameter 2 a custom effect with up to 4 actions can be turned on with correct input for parameters 22 24, 30. this parameter controls the level of those actions. see website for details. https://inovelli.com/lzw45/parameters 2 4 0 1667457891 0 from to description 0 1667457891 see website for further instructions: https://inovelli.com/lzw45/parameters textsID Description Value 8 
