✅ Future-proofBuilt to keep working — even if the maker walks away.
It works locally over Z-Wave, so it keeps running even if Zooz shuts down the app or the servers. Nothing here ties you to a single company's survival.
Works locally over Z-Wave — keeps running without the maker's cloud
Still in production
Based on how this device connects (local vs. cloud), whether it’s still sold and supported, and its app / subscription. A guide, not a guarantee.
Connectivity
Z-Wave
Prices
No prices yet — be the first to add one.
Community tags
Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).
Community photos
Photos from members
No member photos yet.
Reviews
What members say
Sign in to rate RGBW DIMMER ZEN31 and share a photo.
No reviews yet.
Community
Be the first to start a thread about RGBW DIMMER ZEN31
FEATURES: - Manual or Z-Wave on/off, brightness, and RGBW color control - Perfect for programming your existing RGBW LED strip - Energy monitoring in live mode and over time - Double tap to full brightness feature + optional scene control - Remembers and restores on/off status after power failure - Built-in Z-Wave Plus signal repeater to extend network range - S2 security protocol and AES-128 bank-grade encryption SPECIFICATIONS: - Model Number: ZEN31 - Z-Wave Signal Frequency: 908.42 MHz - Power: 12 / 24 V DC (Do NOT connect to 120 V AC high-voltage power!) - Maximum Load: 10 A total between all channels (6 A per channel max); 120 W total when powered by 12 V DC / 240 W total when powered by 24 V DC - Range: Up to 100 feet line of sight - Operating Temperature: 32-104° F (0-40° C) - Installation and Use: Indoor only - Dimensions: 1.67” x 1.5” x 0.69”
Want to buy adds it to your wish list and follows Zooz for updates. I own it adds it to your collection.
FEATURES: - Manual or Z-Wave on/off, brightness, and RGBW color control - Perfect for programming your existing RGBW LED strip - Energy monitoring in live mode and over time - Double tap to full brightness feature + optional scene control - Remembers and restores on/off status after power failure - Built-in Z-Wave Plus signal repeater to extend network range - S2 security protocol and AES-128 bank-grade encryption SPECIFICATIONS: - Model Number: ZEN31 - Z-Wave Signal Frequency: 908.42 MHz - Power: 12 / 24 V DC (Do NOT connect to 120 V AC high-voltage power!) - Maximum Load: 10 A total between all channels (6 A per channel max); 120 W total when powered by 12 V DC / 240 W total when powered by 24 V DC - Range: Up to 100 feet line of sight - Operating Temperature: 32-104° F (0-40° C) - Installation and Use: Indoor only - Dimensions: 1.67” x 1.5” x 0.69”
Hardware platform
ZM5101
Short description
Use this tiny RGBW dimmer to add Z-Wave to your existing DC lighting like color LED strips, under cabinet DC lighting, and more.
Product identifier
ZEN31
Countries / regions
United States of America
Supports smart start
Yes
Certification number
ZC10-19126818
Radio range z wave (m)
40
Configuration parameters
Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
Supports explorer frames
Yes
Supported command classes
Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Controlled command classes
Identifier Name Key Version COMMAND_CLASS_SWITCH_COLOR_V3
Supported multilevel sensors
Multilevel Sensor Type Power
Supported notification types
Notification Type Event / State Power Management
Supported / controlled meter types
Meter Type Rate Type Description Electric meter
Value 120 w at 12 vdc, 240 w at 24 vdc z wave scene type value central scene color value black switch load capacity current value 10 a total (6 a per channel) association groups
Group Number Maximum Nodes Supported End Point ID Group Name Description 7
From to description 0 0 forced to off (regardless of state prior to power outage) 1 1 remem bers and restores on/off status after power failure 2 2 forced to on (regard less of state prior to power outage) 156 double click on trigger for associated devices set the status or brightness level triggering other associated devices in your network if the dimmer is turned on with a double click. each of the 4 available bytes refers to one channel, starting with in1 and ending with in4. this setting applies to basic set and switch multilevel commands sent to associated devices in the appropriate association group. 1 4 0 255 99 from to description 0 99 custom brightness level 255 255 on 150 rgbw / hsb wall switch mode choose how switches connected to the input terminals control your led strip. in the default rgbw mode, each switch connected to each input terminal controls the rgbw channels separately (so in1 for red, in2 for green, etc) with a single click for on/off, double click to full brightness, and press and hold to dim (momentary switches only). in the hsb mode, in1 controls hue, in2 – saturation, in3 – brightness, in4 – white with single click for last set value or value 0, double click to max value, and press and hold to set custom value. 1 1 0 1 0 from to description 0 0 rgbw mode (default) 1 1 hsb mode 23 switch / input type for in4 choose the input / switch type you want to connect to the in4 terminal. 1 1 0 4 2 from to description 0 0 analog sensor with no pull up 1 1 analog sensor with pull up 2 2 momentary switch (default) 3 3 toggle switch (state changes whenever the switch is toggled) 4 4 toggle switch (light on when the switch is toggled up, light off when the switch is toggled down) 65 energy report threshold choose how you want your rgbw dimmer to report energy use (k wh) to your hub. the number entered as value corresponds to decimal values in energy usage change. so if 10 is entered by default, the rgbw dimmer will report any change in energy use over 0.1 k wh. energy reports are sent in at least 30 second intervals. 1 2 0 500 10 from to description 0 0 disabled (it will not report energy use based on value change) 1 500 0.01 5 k wh 151 physical ramp rate adjust the ramp rate for your rgbw dimmer (fade in / fade out effect for on / off operation). values correspond to the number of seconds it take for the dimmer to reach full brightness or turn off when operated from the connected wall switch. 1 2 0 254 3 from to description 0 0 instant on/off 1 127 seconds 128 254 1 127 minutes 63 analog sensor voltage reporting / trigger threshold choose how you want your rgbw dimmer to report voltage changes from the connected analog sensors and trigger status change on the output. the number entered as value corresponds to decimal values in voltage change. so if 5 is entered by default, the rgbw dimmer will report any change in voltage of the connected sensor over 0.5 v. this setting is only in effect if at least one of parameters 20 – 23 is set to value 0 or 1 (input is set to analog sensor mode). 1 2 0 100 5 from to description 0 0 disabled (it will not report voltage based on value change) 1 100 0.1 – 10 v 154 single click on trigger for associated devices set the status or brightness level triggering other associated devices in your network if the dimmer is turned on with a single click. each of the 4 available bytes refers to one channel, starting with in1 and ending with in4. this setting applies to basic set and switch multilevel commands sent to associated devices in the appropriate association group. 1 4 0 255 255 from to description 0 99 custom brightness level 255 255 on 152 z wave ramp rate adjust the ramp rate for your rgbw dimmer when operated remotely from the z wave hub. 1 2 0 254 3 from to description 0 0 instant on/off 1 127 seconds 128 254 1 127 minutes 155 single click off trigger for associated devices set the status or brightness level triggering other associated devices in your network if the dimmer is turned off with a single click. each of the 4 available bytes refers to one channel, starting with in1 and ending with in4. this setting applies to basic set and switch multilevel commands sent to associated devices in the appropriate association group. 1 4 0 255 0 from to description 0 99 custom brightness level 255 255 on 157 preset programs enable one of the preset animated color programs to set the mood with a click. 1 1 0 10 0 from to description 0 0 preset programs disabled (default) 6 6 fireplace 7 7 storm 8 8 rainbow 9 9 polar lights 10 10 police (strobing red, white, and blue) texts
