✅ Future-proofBuilt to keep working — even if the maker walks away.
It works locally over Z-Wave, so it keeps running even if Aeotec shuts down the app or the servers. Nothing here ties you to a single company's survival.
Works locally over Z-Wave — keeps running without the maker's cloud
Still in production
Companion app is actively updated
Based on how this device connects (local vs. cloud), whether it’s still sold and supported, and its app / subscription. A guide, not a guarantee.
Connectivity
Z-Wave
Prices
No prices yet — be the first to add one.
Community tags
Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).
Aeotec Nano Shutter is a Z-Wave motor controller specifically used to enable Z-Wave command and control (up/down/stop) for existing window covering motors. It can connect to 2 external manual switches/buttons to control the motor up/down/stop independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Nano Shutter. The wireless module is powered from the mains supply. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status. Nano Shutter is also a security Z-Wave plus device and supports Over The Air (OTA) feature for the products firmware upgrade. It can be a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node. By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Want to buy adds it to your wish list and follows Aeotec for updates. I own it adds it to your collection.
Aeotec Nano Shutter is a Z-Wave motor controller specifically used to enable Z-Wave command and control (up/down/stop) for existing window covering motors. It can connect to 2 external manual switches/buttons to control the motor up/down/stop independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Nano Shutter. The wireless module is powered from the mains supply. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status. Nano Shutter is also a security Z-Wave plus device and supports Over The Air (OTA) feature for the products firmware upgrade. It can be a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node. By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Hardware platform
ZM5101
Short description
Aeotec Nano Shutter is a Z-Wave motor controller specifically used to enable Z-Wave command and control (up/down/stop) for existing window covering motors.
Product identifier
ZW141-F
Countries / regions
India
Certification number
ZC10-19036410
Radio range z wave (m)
40
Configuration parameters
Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 80
Supports explorer frames
Yes
Supported command classes
Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Controlled command classes
Identifier Name Key Version COMMAND_CLASS_SWITCH_BINARY
Value endpoint aware firmware updatable value updatable by consumer by rf z wave scene type value scene association groups
Group Number Maximum Nodes Supported End Point ID Description 1
From to description 1 1 send basic cc report 0 0 send nothing 85 set the operation mode of external switch set the operation mode of external switch. note: for the description of operation mode 1 or 2, please refer to the user manual. 0 1 0 0 1 from to description 0 0 operation mode 1 1 1 operation mode 2 120 configure the external switch mode for s1. configure the external switch mode for s1. 0 1 0 0 0 from to description 0 0 unidentified mode 1 1 reserved 2 2 3 way switch mode 3 3 momentary push button mode 4 4 enter automatic identification mode 121 configure the external switch mode for s2. configure the external switch mode for s2. 0 1 0 0 0 from to description 1 1 reserved 2 2 3 way switch mode 3 3 momentary push button mode 4 4 enter automatic identification mode 0 0 unidentified mode 248 set the function of s1/s2. set the function of s1/s2. 0 1 0 0 83 from to description 0 0 the functions of s1 and s2 are disabled. 1 1 the function of sending nif is enabled. 4 4 the function of factory reset is enabled. 2 2 he function of entering rf power level test mode is enabled. 128 128 the setting for sending nif, entering rf power level test mode and factory reset are effective 252 lock/unlock configuration parameters lock/unlock configuration parameters. 0 1 0 0 0 from to description 0 0 unlock 1 1 lock 255 reset the nano shutter reset the nano shutter to factory default. 0 4 0 0 0 from to description 1431655765 1431655765 reset to factory default setting and removed from the z wave network 0 0 reset all configuration parameters to factory default setting texts
