Long descriptionThe devolo Home Control Smart Metering Plug is an intelligent wall socket that adds useful additional functions to all wall sockets present in the household. This enables connected devices to be switched on and off based on time control, either using rules configured in the Z-Wave-compatible control unit or using the corresponding app. In addition, the devolo Home Control Smart Metering Plug has an energy consumption measurement feature. From to description 3 3 one flash mode 1 1 show switch state 2 2 show night mode 8 auto off timer if the home control smart metering plug switches to on, the auto off timer starts counting down. after the timer is set to zero, the device shuts off automatically. if the auto off timer function is set to 0, it is disabled. 0 2 0 0 0 from to description 0 0 disable auto off function 1 32767 auto off time in unit 1s 1 watt meter report period if 1 hour is set (target value =720), the home control smart metering plug reports its power consumption at the current time every hour to the node id of group 1. the maximum reporting period is 45 hours (5s*32767/3600=45hr). 0 2 0 0 720 from to description 1 32767 report period in unit 5s 2 kwh report period if 1 hour is set (target value =6), the home control smart metering plug reports its accumulated power consumption every hour to the node id of group 1. the maximum reporting period is 227.55 days (10s*32767/1440=227.55 days). 0 2 0 0 6 from to description 1 32767 report period in unit 10min 3 threshold of current for load caution if the current load exceeds the defined value, the home control smart metering plug sends a meter message to the node id of group 1. 0 2 0 0 1300 from to description 10 1300 threshold in unit 0.01 a 4 threshold of kwh for load caution if the k w load exceeds the defined value (default value: 10,000, for an elevated accumulated power consumption), the home control smart metering plug sends a meter message to the node id 1. 0 2 0 0 10000 from to description 1 10000 threshold in unit 1 kwh 5 restore switch state mode if the home control smart metering plug is disconnected from the mains power supply and then reconnected to the mains power supply, depending on the configuration, it will trigger the switch off, set the last switch state or set the switch on. the default setting is always the last switch state. 0 1 0 0 1 from to description 0 0 switch off 1 1 last switch state 2 2 switch on 9 rf off command mode if the command switch off basic set 、binary switch set 、switch all off is received, this can be interpreted in four different ways: 0. switch off: the home control smart metering plug switches itself off (default setting). 1. ignore: the command switch off is ignored. 2. switch device: the home control smart metering plug switches to the opposite state. 3. switch on: the home control smart metering plug switches itself on. 0 1 0 0 0 from to description 0 0 switch off 1 1 ignore 2 2 switch toggle 3 3 switch on 6 mode of switch off function if switch on/off is set to 0, both the switch off command and the on/off button are disabled. the default setting is the enable switching. 0 1 0 0 1 from to description 0 0 disable 1 1 enable textsID Description Value 5 
