The REM50Z (Remote Equipment Monitor) Quad Channel Remote Temperature Sensor is a wall mountable Z-Wave remote temperature sensor for use with all Z-Wave systems. This sensor is ideal for remotely monitoring up to 4 operating temperatures on HVAC systems: Supply, Return, and Refrigeration In/Out Line Temps. Additionally, the REM50 has a single channel contact closure / voltage detection circuit that can be used to monitor and report Condensate Pan fill level of the HVAC system. Features • Z-Wave 500 Series Radio • Supports Z-Wave Plus • Quad Temp Sensor Circuits: +/- 1 degree F, Range: -40F to 120F o Designed for 10k Thermistor temp sensors, not included • 1 Contact Closure / Voltage Detection Circuit o Designed to detect Float Switch closure, not included • 6 Status LEDs • Designed for interior use in mechanical room, attic or crawlspace • Compatible with RCS Z-Wave Thermostats • Compatible with all Z-Wave systems • Wall Mountable • Small, Thin, Lightweight • Grey, Paintable Dimensions • 5.10” X 2.25” X 0.9” Power • 16 – 28 VAC • 12 – 24 VDC
Want to buy adds it to your wish list and follows RCS for updates. I own it adds it to your collection.
The REM50Z (Remote Equipment Monitor) Quad Channel Remote Temperature Sensor is a wall mountable Z-Wave remote temperature sensor for use with all Z-Wave systems. This sensor is ideal for remotely monitoring up to 4 operating temperatures on HVAC systems: Supply, Return, and Refrigeration In/Out Line Temps. Additionally, the REM50 has a single channel contact closure / voltage detection circuit that can be used to monitor and report Condensate Pan fill level of the HVAC system. Features • Z-Wave 500 Series Radio • Supports Z-Wave Plus • Quad Temp Sensor Circuits: +/- 1 degree F, Range: -40F to 120F o Designed for 10k Thermistor temp sensors, not included • 1 Contact Closure / Voltage Detection Circuit o Designed to detect Float Switch closure, not included • 6 Status LEDs • Designed for interior use in mechanical room, attic or crawlspace • Compatible with RCS Z-Wave Thermostats • Compatible with all Z-Wave systems • Wall Mountable • Small, Thin, Lightweight • Grey, Paintable Dimensions • 5.10” X 2.25” X 0.9” Power • 16 – 28 VAC • 12 – 24 VDC
Hardware platform
ZM5202
Short description
The REM50Z is a wall mountable sensor for remotely monitoring up to 4 temperatures and has a voltage detection circuit that can be used to monitor condensate pan fill level of an HVAC system.
Product identifier
REM50Z
Countries / regions
United States of America
Certification number
ZC10-18076173
Radio range z wave (m)
40
Configuration parameters
Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
Supports explorer frames
Yes
Supported command classes
Identifier Name Key Version COMMAND_CLASS_SENSOR_MULTILEVEL_V5
Supported multilevel sensors
Multilevel Sensor Type Air temperature
Supported notification types
Notification Type Event / State Water Alarm
Value gray sensors value air temperature voltage supported notification types value water alarm firmware updatable value updatable by consumer by rf association groups
Group Number Maximum Nodes Supported End Point ID Description 1
From to description 7 7 degrees 2 rs2 sensor cal add or subtract an offset for the s2 temperature sensor. 0 1 0 0 0 3 rs3 sensor cal add or subtract an offset for the s3 temperature sensor. 0 1 0 0 0 from to description 7 7 degrees 9 rs1 lifeline periodic temperature send interval how many minutes between periodic temperature reports. 0 1 0 0 120 from to description 1 120 minutes 4 rs4 sensor cal add or subtract an offset for the s4 temperature sensor. 0 1 0 0 0 from to description 7 7 degrees 17 rs1 group2 periodic temperature send interval how many minutes between periodic temperature reports to association group 2. 0 1 0 0 0 from to description 0 120 minutes 23 rs2 time constant filter time constant. larger number gives a slower temperature response. 0 1 0 0 10 from to description 1 60 seconds 24 rs3 time constant filter time constant. larger number gives a slower temperature response. 0 1 0 0 10 from to description 1 60 seconds 10 rs2 lifeline periodic temperature send interval how many minutes between periodic temperature reports. 0 1 0 0 120 from to description 1 120 minutes 11 rs3 lifeline periodic temperature send interval how many minutes between periodic temperature reports. 0 1 0 0 120 from to description 1 120 minutes 25 rs4 time constant filter time constant. larger number gives a slower temperature response. 0 1 0 0 10 from to description 1 60 seconds texts
